Plumbing Company in Tampa Reveals Tips & Tricks to Leaky Faucets

A drippy, leaky faucet can be an annoyance for any homeowner. Here at Case Plumbing & Sewer, we understand that these tiny droplets can result in sleepless nights, increased water bills, and overall frustration with your home. Not all faucets are the same, but this repetitive sound will drive just about anyone crazy. Plumping Tampa is a touchy subject, as this experience can be costly and leave a portion of your home out of commission for an extended period of time. Most repair cases require a plumber Tampa, but these tips can send you on your way to perform minor repairs for your leaky faucet:

1. Turn off the water: The first step involves looking underneath your sink for the pipes that run-up to the faucet. Somewhere along those pipes, you can locate the part where you shift the water off to the sink. Twist these handles clockwise to shut off the water source.
   Plug drain: The next step is to plug your sink drain. This is because tools and pieces can fall down the drain and cause further damage during the midst of performing a repair.
2. Identify the type of faucet: There are many different types of faucets which require separate repairs. A compression faucet has two screw handles while others have one central arm that swivels to change the water temperature.
3. Remove the handles: Pry off the decorative cap part of the handle then unscrew to remove the handle. After, use a wrench to remove the nut. Underneath the handles is the stem which sits on the O-ring. This O-ring sits on the top of a seat washer which is made up of rubber. The rubber gets worn out and can likely be the cause of your dripping faucet.
4. Replacing the O-rings: Cut off the old O-rings and coat the new ones you purchased in some form of plumber’s grease before installing them.
5. Reassemble: Lastly, reassemble the handle and turn the water on slowly. If you run the water too forcefully, it can crack the ceramic disk.